Eibach ANTI-ROLL-KIT AS41-55-019-01-FA Скачать руководство пользователя

Страница: 1 / 8

D3432

www.eibach.com

Page 1

Kit Contents

Description

Part Number

Qty

Front Bar

AS41-55-019-01-FA

Anti-Roll

Hardware

Kit

AS41-55-019-01-FAHK

Information

Kit

EPAK

Instructions

AS41-55-019-01-FAINST

NOTES:

Read All Instructions Before Beginning Installation



Only qualified mechanics experienced in the installation and removal of suspension components should
perform this installation.



Use

of a hoist and screw jack is highly recommended and will substantially reduce installation time.



Never work on or under a vehicle unless it is properly supported.



Tire Rotation:

In order to increase the life of your tires, it is recommended to rotate your tires every 3,000 miles.

FACTORY FRONT BAR REMOVAL

1. Begin by raising the vehicle and supporting it with the

proper safety equipment, then, remove the front wheels.

Note: Never work on or under a vehicle that is not
supported by the proper safety equipment.

2. Remove the left and right side inner fender covers, and

the center splash shield as shown.

(See Photos 1, 2, 3

& 4)

Installation Instructions

Anti-Roll-Kit

# AS41-55-019-01-FA

2016+ Mazda, MX-5, ND

Eibach Springs, Inc.



264 Mariah Circle



Corona, California 92879-1751



USA



Tech Support 800-222-8811 Ext 114

Photo

Содержание ANTI-ROLL-KIT AS41-55-019-01-FA









Результаты поиска

Содержание ANTI-ROLL-KIT AS41-55-019-01-FA

Отзывы:

Похожие инструкции для ANTI-ROLL-KIT AS41-55-019-01-FA

Бренды по названию

Популярные бренды

Eibach ANTI-ROLL-KIT AS41-55-019-01-FA, Руководство по установке

Результаты поиска

Содержание ANTI-ROLL-KIT AS41-55-019-01-FA

Отзывы:

Похожие инструкции для ANTI-ROLL-KIT AS41-55-019-01-FA

Бренды по названию

Популярные бренды