5
Mounting
WARNING:
to prevent injury, this device must be securely attached
to the wall or ceiling in accordance with the installation instructions.
Remove the mounting bracket
from the packaging.
Place the mounting bracket exactly
where you want to mount the
sensor. With a pencil, mark the
location of the two screw holes.
Taking care to avoid any electrical
wiring, drill holes using a 5.0mm
drill bit through the centre of the
marked locations. Push the plastic
screw anchors provided into the
drilled holes. Screw the mounting
bracket to the wall/ceiling (see
figure 2).
IMPORTANT:
Make sure the mounting bracket is positioned so that
the text is at the top.
Adding the Environmental Sensor
to the Gateway System
Open your SmartLINK App available to download from the Google Play
or iTunes app store and simply follow the steps in the SmartLINK App
.
Figure 2
