Configuration Parameters
Z-Wave products are supposed to work out of the box after inclusion. As this is a life safety device we strongly recommend that you don’t change the
configuration parameters as this may effect the performance of the product.
Limitations of the Z-Wave System
1. Alarms are not wirelessly interlinked to each other.
2. Only the initiating Alarms will sound.
3. The Z-Wave protocol is not a life safety protocol and should not be relied upon for life safety.
4. If your internet connection is lost, communication from your 3rd party controller (i.e. to cloud or mobile devices) may not be
possible. Your Alarm will still continue to operate as a stand alone Alarm and does not rely on an internet connection to do so.
Command Classes
Supported Command Classes
• Basic (version 1)
• Binary Sensor (version 2)
• Association Group Information (version 1)
• Device Reset Locally (version 1)
• Z-Wave Plus Information (version 2)
• Configuration (version 1)
• Alarm (version 5)
• Manufacturer Specific (version 2)
• Powerlevel (version 1)
• Battery (version 1)
• Association (version 2)
• Version (version 2)
• Wake-up (version 2)
Controlled Command Classes
• Basic (version 1)
Z-Wave Technical Data
Wireless Module Battery type
Powered from Alarm Battery
Frequency
@ 908.42 MHz , FCC part 15
Wireless Range
up to 100m outdoor, 40m in buildings
Explorer Frame Support
Yes
SDK
6.51.6
Device Network Role
Sleeping Reporting Slave (SRS)
Device Type
Sensor
Routing
No
FLiRs
No
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
ISED
This device complies with ISED’s license-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
P/N B18821 Rev2
© Ei Electronics 2017
CARBON
MONOXIDE
ALARM
ALARM
FAULT
POWER
3
Please return to:
Customer Service
Ei Electronics US, Inc
2 Tunxis Road, Suite 209
Tariffville, Connecticut 0608
web: www.ei-electronics.com
