Ei Electronics Ei100MRF, Инструкция по эксплуатации

Страница: 4 / 24

3
The Ei100MRF Ra Module is the next generation RF module designed to
fit in the Ei160e and Ei2110e series, Easi-fit mains powered Alarms. The Ei100MRF
Ra Module effectively replaces the Ei168RC RadioLINK Base.
The primary function of the Ei100MRF is to wirelessly interconnect all Ei Electronics
Alarms in a system by the means of an RF signal i.e. when one Alarm senses a fire
event, the Ei100MRF module attached to that Alarm will transmit an RF signal that
will activate the sounders in all other Alarms in the system.
The Ei100MRF module is plugged into the rear of the base of an Ei160e or Ei2110e
series Alarm. RF communication through this module eliminates the need to install
long interconnect wires between all the Alarms on different floors in different rooms.
The Ei100MRF is powered from the Alarm it is connected to.
The module also has “multiple repeater” transmission – this provides multiple signal
paths to create a robust RF ‘mesh’ system and also increase the RF range.
Introduction