- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and return the enclosed
warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product
that fails to operate due to defects in materials or workmanship for a period of one year from date of
purchase. This applies only to original purchasers who have bought their product from an authorized Electro-
Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original
warranty term.
If you should need to return your unit for service within the warranty period, please contact the appropriate
office listed below. Customers outside the regions listed below, please contact EHX Customer Service for
information on warranty repairs at [email protected] or +1-718-937-8300. USA and Canadian customers: please
obtain a
Return Authorization Number
(RA#) from EHX Customer Service before returning your product.
Include with your returned unit: a written description of the problem as well as your name, address,
telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email: [email protected]
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: [email protected]
This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending
upon the laws of the jurisdiction within which the product was purchased.
To hear demos on all EHX pedals visit us on the web at
www.ehx.com
Email us at
FCC COMPLIANCE
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help
.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rule
POG 2
Polyphonic Octave Generator
Congratulations on your purchase of the POG 2! The POG 2 is a Polyphonic Octave Generator that draws
its heritage from the now legendary POG, originally released in 2005 to worldwide acclaim. The POG 2 can
simultaneously generate multiple octaves from your input signal. Whether you play single notes, arpeggios
or full chords, the POG 2 will perfectly track every note you play. With the POG 2, you can mix together
your original "dry signal" with four different octaves: one octave above the original note, two octaves
above the original note, one octave below your original note and two octaves below the original note.
Additionally you can detune the two upper octaves, slow the attack on all voices including the dry signal
and process the overall tone through a low pass resonant filter with adjustable filter cutoff and selectable
Q. The POG 2 is fully programmable allowing you to store and load presets for performance and recording.
-CONTROLS-
DRY OUTPUT Slider
–
Controls the output volume of your original DRY signal before it exits the POG 2.
The DRY OUTPUT volume will increase as its slider is pushed upward.
-2 OCTAVES Slider
–
Controls the output volume of the signal 2 octaves below the input signal, which is
one quarter of the frequency of the input signal. As this slider is pushed upward, the volume of the -2
OCTAVE below the original pitch will increase. If you play a middle C note, this slider will control the
volume of the C note two octaves
below
middle C.
-1 OCTAVE Slider -
Controls the output volume of the signal 1 octave below the input signal, which is
half the frequency of the input signal. As this slider is pushed upward, the volume of the -1 OCTAVE below
the original pitch will increase. If you play a middle C note, this slider will control the volume of the C note
one octave
below
middle C.
+1 OCTAVE Slider
–
Controls the output volume of the +1 octave signal. True to its name, the +1
OCTAVE signal is one octave above the original input signal. The +1 octave signal is twice the frequency of
the original input signal. The volume of the +1 OCTAVE will increase as this slider is pushed upward. If you
play a middle C note, this slider will control the volume of the C note one octave
above
middle C.
+2 OCTAVE Slider
–
Controls the output volume of the +2 octave signal. The +2 octave signal is two
octaves above the original input signal or four times the frequency of the original input signal. As this slider
WARNING:
Use only the 9.6 VDC 200mA adapter the POG 2 comes supplied with. Do not
use any other adapters. Using other adapters, even those made by Electro-Harmonix, could
cause harm to the unit, the adapter or you. The POG 2 does not use batteries.
