EHS DIOXDry, Руководство пользователя

Страница: 10 / 15

Emptying the Water Tank
Lift by the handle
Pull tank out
Remove the cover Pour the water contents
Refit the cover
Restore the tank
9
1. When the tank is FULL the ‘FULL’ LED on the control panel will
illuminate and the dehumidifier will stop operating after several
minutes.
2. DO NOT move the appliance while the tank is full, as this can lead
to water spillage and create a potential hazard.
3. To remove the tank, grip the tank firmly by the bottom edge and
pull it out. Any spillage should be dried immediately to avoid a
potential hazard.
NOTE:
Clean the tank using warm water with a mild detergent. Do not use
solvents or abrasive materials.
When handling the tank, due care is required to prevent damaging the
float. Do not attempt to remove the float. An incorrectly fitted or
damaged float will prevent the dehumidifier from working.
The ‘FULL’ LED will illuminate if the tank is not fitted correctly or the
float is damaged.