![EHRLE KD 2x2 Series Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/ehrle/kd-2x2-series/kd-2x2-series_operators-manual_2368759011.webp)
301801 • 1/2021 • H.S.
11 of 48
Operating Instruction
High Pressure Cleaner cold water, mobile
Series 2x2
2 Safety
2
Safety
2.1
General safety information
Observe the respective national regulations of the legislator for liquid sprayers.
Observe the relevant national regulations of the legislator on accident
prevention. Liquid sprayers must be inspected regularly and the result of the
inspection must be recorded in writing.
Observe the safety instructions provided with the cleaning agents used (usually
on the packaging label).
Keep cleaning agents out of the reach of unauthorized persons. Risk of
poisoning or caustic burns from cleaning agents! Observe the instructions on
the cleaning agents.
Perform prescribed maintenance and inspection work in due time (see
Section 8, Maintenance).
Safety-relevant defects must be rectified immediately. Keep all signs on the
device legible.
2.2
Authorized persons for device access
Ensure that access to the device is only possible for the persons who
●
have completely read and understood the information and instructions in
this Installation and Operating Instruction and can therefore guarantee safe
handling of the device or
●
are instructed and trained on the device.
Children as well as persons with reduced physical, sensory or mental abilities
are not allowed to operate the device.
2.3
Safety instructions for cleaning operation
During cleaning work, the personnel at the workplace must wear the necessary
Personal Protective Equipment (PPE). This includes waterproof protective suits,
rubber boots, protective goggles, headgear, ear protection if necessary, etc.
No cleaning work may be carried out in the presence of persons without
sufficient PPE.
Before switching on, carry out a visual inspection of the device parts from the
outside for damage (HP-Hose, electrical or mechanical parts). Devices with
damaged parts, assemblies or components must not be put into operation.
The water jet leaving the trigger gun must not be directed at
●
persons
●
animals
●
live electrical installations (building mains connections, sockets,
electrical wiring, etc.)
●
live electrical installations, machines, devices, assemblies or components
●
system, machinery or equipment in operation.
Under the influence of the high pressure jet, parts can be separated from the
cleaning object and thrown away. Persons can be injured as a result.