EHRET FSL-light Скачать руководство пользователя страница 5

5

Important notes

   no personnel or obstacles are permitted to 

be within the range of pivoting and/or travel-
ling shutters while they are moving. Keep 
personnel and objects away until the shut-
ters have reached their final position.

  Do not reach into moving parts or closing 

areas while shutters are opening or closing.

  Make sure that no articles of clothing or 

body parts are able to be caught by moving 
parts in the system.

   Ice could form on the product in the event of 

snowfall, sleet or icy rain. Do not operate 
equipment until the ice is no longer present.

  

Make sure that the shutters are locked be-
fore any wind load occurs.

  

the shutters may not be operated at wind 
speeds from 62 km/h (stormy wind).

  

no additional loads such as persons or ob-
jects are permitted to have an effect on the 
shutters.

  

Shutters are not intended to protect individ-
uals from falls.

 

WArNINg

Danger of injury from the weight of 
the product!

  Due to the weight of the products, 

transport and installation must be car-
ried out by at least two individuals.

  

transport the product carefully in order to 
avoid damage.

  

take care to ensure that the product is not 
damaged when the packaging material is re-
moved.

 

WArNINg

Danger of suffocation from packaging 
foil. 

  the packaging foil must be kept out of 

reach of children.

  Store the foil carefully until you turn it in 

for recycling.

   turn the packaging materials in for recycling.

Содержание FSL-light





















Отзывы: