EHP USB-Box, Техническое руководство

Страница: 14 / 23

1
"Weight" shows the current weight of the scale when the connection is active; if there is no
connection, the display is empty.
2
Lights green when the connection is active, lights red when the scale is not in radio range or
is off, lights orange when the scale has no stable weight.
3 Flashes red with each data package received from the scale
4
"Connection - Port" Select the port of your USB box via scroll-down
(see driver installation USB-Box).
5
“Connect/Disconnect" button establishes the connection between the software and the
scale. Each time "Connect" is pressed; the current settings of the software are loaded into
the USB-Box.
6
“Channel" set the channel used by your scale. You can find out the channel setting of your
scale by pressing the test key on the scale (or remote control). See also chapter “Changing
the scale channe l setting”.
7 "Read data / Delete all Data" these keys have no effect on the USB box.
8 "Path" select the path where the Setup Tool should save weighing data.
9 Switches tare function of the scale on/off
10 Resets the scale to zero
11 "Print".saves a single data record of a scale in the stored.
12 "Add" adds up weights with each keystroke.
13 „Total“ adds the weights that were entered with "Add".
14
„Log“ here you can see information about the weighing data exchanged between the scale
and the PC.
Table 3 – User interface
Settings
•
“ Save current settings as default" Saves all settings of the setup tool as
default, the tool will start with these settings in the future.
•
"Change unit" Switches the display between kg and t.
•
"End" terminates the application
Help
•
Displays EHP contact information
Language
•
Change language (German/English)
Table 4 - Menu tab