Do not clean the unit – or parts of it – in the dish-
water. Not dishwater resistant!
Do not dispose of this product as normal house-
hold waste. Take it to your local refuse collection
side.
The product is qualified in accordance with the
respective national regula-
tions and guidelines and
meets EC standards.
A Definition
a
Motor body
b
Pump wheel
c
Pump cover with pow-
er controller
d
3 x suction units
e
Filter cartridge (1 x
for 2203 and 2 x for 2204)
f
Filter canister 2203
g
Fil-
ter cartridge 2204.
Disconnect the power plug! Tilt the filter case upwards by
applying gentle pressure
A
and remove it from the pump
cover. Remove the filter cartridge
B
and rinse it thoroughly.
Tilt the pump cover downwards by applying gentle pressure
B Installation and operation
Press the 3 suction units
d
into the lateral openings of
the pump cover
c
by applying a rotating movement.
2203:
Attach the shallow water filter below the water level
onto the floor or on an inner side of the water tank.
Mini-
mum immersion depth of 4 cm.
Note:
When laying the cable, make sure that it cannot be
damaged by animals.
2204:
Fasten the internal filter below the water level on
the inside of the aquarium.
Minimum immersion depth of
12 cm.
2203 / 2204:
By shifting the power controller
c
, the cir-
culation rate can be adjusted as needed. Following instal-
lation, put the filter into operation by plugging in the power
cord.
C Care and maintenance
