EGT EGRO-80, Руководство пользователя, Страница: 7 / 16

7
How to install before use
Installation Overview
②
Please be sure to turn o
ff
adapter valve when connecting water supply.
Check for any sign of leakage all tubing connections.
③
Check the tubing line is all straight position.
④
Do not let power cord hangover the edge of table or counter, or touch hot surfaces.
⑤
⑥
Do not operate machine before finishing installation work.
Do not install it where the temperature and humidity are high. Keep it in a place it may
not be adversely affected by temperature, sunlight, dust, salt, etc.
⑦
①
Do not use warm or hot water, as may this damage the machine.
A typical connection using the included adapter valve is shown in the illustration below.
Connect diverter for water supply to cold water pipe and inhale water up to 1/4 inch.
Caution
Please be sure to turn o
ff
adapter valve.
Please be sure to connector to a cold water pipe.
Firmly push the inlet water tubing onto water inlet collar.
Respectively not escape.
Screw nut onto the diverter.
Caution
•
•
Install a tubing in a correct position.
Turn on the adapter valve.
Check any sign of leakage all tubing connections.
Cold water pipe
Adapter valve
Inlet water tubing
Middle valve for inlet water
Hot
Drain
Drain pipe
Drain clamp
Cold