EGS Electrical Group • 800-621-1506 • www.appletonelec.com
331114-1 Rev. B 08/12/08
Page 2
APPLICATION:
•
Designed to supply power to portable or
fi
xed
electrical equipment such as welders, infrared
ovens, batch feeders, conveyors and truck and
marine docks.
•
Designed to supply three (3) phase, grounded
electrical power to the aforementioned electrical
equipment.
•
Designed to provide an interlocked receptacle
for use in ordinary (non-hazardous) locations, as
de
fi
ned by the National Electrical Code (NEC). In
addition, the receptacle is designed such that a
mating plug can only be engaged and disengaged
when the switch handle is in the "OFF" position.
•
Ideal for use on shipping docks, ports, and
other "ship to shore" applications.
•
Suitable for use in locations that require a degree
of protection from the elements (See TABLE
A). Enclosure cover and receptacle housing are
sealed with gaskets. The receptacle housing
fl
ip
cover is gasketed to seal against the housing.
In addition, mating plugs can be engaged to the
receptacle face to provide weatherproof union,
SHORT CIRCUIT RATING FUSED/
NONFUSED:
•
Suitable for use on a circuit capable of delivering
not more than 10,000 RMS symmetrical Amperes,
600 VAC maximum .
WARNING
•
Do not modify these devices in any way.
Replace missing or broken parts with the proper
replacement parts from Appleton Electric, LLC.
•
Modi
fi
cation of these devices or substitution
of parts with non-standard parts may result in
serious or fatal personal injury from electrocution.
WARNING
•
If any part(s) of
"WSRD"
unit or the mating plug appear
to be missing, broken or show signs of damage:
DISCONTINUE USE IMMEDIATELY!
This condition could cause serious or fatal personal injury
due to electrocution and/or equipment damage. Repair with
the proper replacement part(s) before continuing service.
WARNING
•
Turn off power supplying WSRD interlocked receptacle
before and during installation and maintenance.
•
Failure to do so may result in serious or fatal injury
from electrocution.
TABLE C
TABLE B
TIGHTENING TORQUE — LINE SIDE
DISCONNECT SWITCH LUG SCREWS
SLOTTED HEAD SCREWS
WIRE SIZE (AWG)
TORQUE (LB.-IN.
)
#14 -#10 AWG
35
#8 AWG
40
#6 - #4 AWG
45
#3 - #2 AWG
70
ACP & CPH PLUGS FOR "WSR" RECEPTACLES
CABLE
DIAMETER (In.)
CURRENT
RATING
CATALOG
NUMBER
.390 - 1.375
30
ACP3034BC
.500 - .875
30
CPH3034B
.500 - 1.375
60
ACP6034BC
.500 - .750
60
CPH6034A
.750 - 1.00
60
CPH6034B
1.000 - 1.375
60
CPH6034C
.500 - 1.375
60
CPH6034BC
.875 - 1.906
100
ACP1034C
*CPH Plug is rated for NEMA 3R applications only.
