330107-1
INSTALLATION AND
APPLICATIONS INSTRUCTION
Instruction Sheet for Appleton’s 20 Amp “CPP” Plug
Applications:
• Locations where receptacles are used with stationary
or portable electrically operated devices such as
lighting systems, conveyors, heaters, motor-generator
sets, air conditioner compressors and pumps.
• Locations where damp or corrosive conditions are
encountered.
• Class I –classified areas such as petrochemical
plants, petroleum refineries, paint and chemical plants
or any location where ignitable vapors or gases are
present.
• Class II –locations such as process industries where
there are dust hazards from handling such products
as flour, grain and starch or any location where
ignitable amounts of dust are present or amounts
which would otherwise effect performances.
Operational Data:
• Lift receptacle door and insert plug all the way into the
receptacle.
• Turn plug clockwise limit (37˚). This closes internal
contacts and completes circuit.
• Release plug.
• To remove plug, apply inward pressure on plug and
turn to counter-clockwise limit (37˚). Pull plug straight
out.
Features:
A. Heavy duty cable grip exceeds UL Standard 1010,
150 lb. pull-out test for classified locations.
B. Twisting plug locks it in place, cannot be accidentally
pulled out.
C. Special neoprene plug bushing accommodates
flexible cord ranging from .536 to .639 inch diameter.
D. Longer plug housing for better gripping and easier
plug insertion and withdrawal.
CABLE DIA.
CATALOG NUMBER
AMPS
DIAGRAM
WIRE/POLE
(INCHES)
125-250V A.C.
20
2W, 3P
.536 - .639
CPP-2023
Class I, Groups B,C,D
Class II, Groups F,G
Class III
The CPP-2023 plug is designed for use with the following receptacles in Class I, Groups B,C,D; Class II, Groups
F,G; and Class II, Division 1 and 2 hazardous locations:
CPSA-2350
CPSA-2375
CPSC-2350
CPSC-2375
CPSE-2350
CPSE-2375
CPSL-2350
CPSL-2375
CPST-2350
CPST-2375
CPSX-2350
CPSX-2375
CPE1-2350
CPE1-2375
CPE1-23100
CPC1-2350
CPC1-2375
CPC1-23100
EFD150-NL
EFD175-NL
EFD110-NL
EFDC150-NL
EFDC175-NL
EFDC110-NL
The CPP-2023 plug is designed for use with the following receptacles in Class I, Groups C,D; Class II, Groups
F,G; and Class II, Division 1 and 2 hazardous locations:
CPE2-2350
CPE2-2375
CPE2-23100
CPC2-2350
CPC2-2375
CPC2-23100
EFD250-NL
EFD275-NL
EFD210-NL
EFDC250-NL
EFDC275-NL
EFDC210-NL
CPR-23
EGS Electrical Group • 7770 North Frontage Road • Skokie, IL 60077
Rev. A
06/25/02
Page 1
