EGO FIO39S-2, Инструкция по использованию, Страница: 8 / 56

8
INSTALLATION INSTRUCTIONS
•
Watch to respect scrupulously the indications relative to the minimum spaces and the
distances of safety required.
•
Do not place nor use the cooktop on an oblique or irregular surface.
•
Watch not to block air inlets or ventilations of the cooktop.
•
Be very attentive when you move or manipulate the cooktop not to damage the ceramic
glass.
•
Do not place the cooktop on a surface subject to temperature variations (such as the
glass) because this one could break or deform.
•
Do not remove the power cord when the cooktop is in the course of use.
•
Do not move the cooktop with a bowl on it. Watch to remove the bowl before moving the
cooktop.
•
Before connecting the device, verify that the nominal tension of the device (voltage
indicated on the descriptive plate) corresponds to the power supply voltage of the sector.
The descriptive plate is situated on the lower cover of the cooktop.
•
This appliance is conceived for a supply 230V~ 50/60Hz.
•
If the power cord is defective, it must be replaced by a power cord or an available
equivalent set from the manufacturer or from an approved repairer or retailer.