background image

4

EN

ROTOCUT ATTACHMENT—RTA2300

READ ALL INSTRUCTIONS! 

READ OPERATOR’S MANUAL

 Residual risk!

 People with electronic devices, such 

as pacemakers, should consult their physician(s) before 
using this product. Operation of electrical equipment 
in close proximity to a heart pacemaker could cause 
interference or failure of the pacemaker.

 WARNING: 

To ensure safety and reliability, all repairs 

and replacements should be performed by a qualified 
service technician.

SAFETY SYMBOL 

The purpose of safety symbols is to attract your attention to 
possible dangers. The safety symbols and the explanations 
with them deserve your careful attention and understanding. 
The symbol warnings do not, by themselves, eliminate any 
danger. The instructions and warnings they give are no 
substitutes for proper accident prevention measures.

 WARNING:

 Be sure to read and understand all 

safety instructions in this Operator’s Manual, including all 
safety alert symbols such as 

“DANGER,”

 

“WARNING,”

 

and 

“CAUTION”

 before using this tool. Failure to follow all 

instructions listed below may result in electric shock, fire, 
and/or serious personal injury.

SYMBOL MEANING

 SAFETY ALERT SYMBOL:

 Indicates 

DANGER

WARNING

, OR 

CAUTION

, may be used in conjunction with 

other symbols or pictographs.

 WARNING: 

The operation of any power tools can 

result in foreign objects being thrown into your eyes, which 
can result in severe eye damage. Before beginning power 
tool operation, always wear safety goggles or safety glasses 
with side shields and a full-face shield when needed. 
We recommend a Wide Vision Safety Mask for use over 
eyeglasses or standard safety glasses with side shields.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may 
appear on this product. Read, understand, and follow 
all instructions on the machine before attempting to 
assemble and operate it.

Safety Alert

Precautions that involve your 
safety.

Read 
Operator’s 
Manual

To reduce the risk of 
injury, user must read and 
understand operator’s manual 
before using this product.

Wear Eye 
Protection

Always wear safety goggles 
or safety glasses with side 
shields and a full face shield 
when operating this product.

Wear Ear 
Protection

Always wear ear protection 
when operating this product.

Wear Head 
Protection

Wear an approved safety 
hard hat to protect your 
head.

Wear 
Protective 
Gloves

Protect your hands with 
gloves when handling blade 
or blade guard.

Wear Safety 
Footwear

Wear non-slip safety 
footwear when using this 
equipment.

Beware of 
blade thrust

Warn the operator of the 
danger of blade thrust.

Do Not 
Expose To 
Rain 

Do not use in the rain or 
leave outdoors while it is 
raining. 

Ricochet 
and Keep 
Bystanders 
Away

Thrown objects can ricochet 
and result in personal injury 
or property damage. Ensure 
that other people and pets 
remain away from the brush 
cutter when it is in use

15m

Keep 
Bystanders 
Away

Ensure that other people and 
pets remain at least 15m 
away from the line trimmer 
when it is in use.

No round 
blade

Do not install round cutting 
blades.

WEEE

Waste electrical products 
should not be disposed of 
with household waste. Take 
to an authorized recycler.

Содержание 176978













Отзывы: