Ego Power+ STA1500 Скачать руководство пользователя страница 7

LINE TRIMMER ATTACHMENT — STA1500

7

 

Remove the battery pack, if detachable, from the 
power tool and/or activate any battery disabling 
device before clearing jammed material, making 
any adjustments, changing accessories, cleaning, 
or storing power tools.

 Such preventive safety 

measures reduce the risk of starting the power tool 
accidentally.

 

Store idle power tools out of the reach of children 
and do not allow persons unfamiliar with the 
power tool or these instructions to operate the 
power tool.

 Power tools are dangerous in the hands of 

untrained users.

 

Maintain power tools and accessories. Check for 
misalignment or binding of moving parts, breakage 
of parts and any other condition that may affect 
the power tool’s operation. If damaged, have the 
power tool repaired before use. 

Many accidents are 

caused by poorly maintained power tools.

 

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are less 
likely to bind and are easier to control.

 

Use the power tool, accessories and tool bits etc. 
in accordance with these instructions, taking into 
account the working conditions and the work to be 
performed.

 Use of the power tool for operations different 

from those intended could result in a hazardous situation.

 

Keep handles and grasping surface dry, clean 
and free from oil and grease.

 Slippery handles and 

grasping surfaces do not allow for safe handling and 
control of the tool in unexpected situations.

 

Keep cables away from the working area of the 
tool.

 During operation cables may be hidden from view 

and can be accidentally damaged by the tool.

BATTERY TOOL USE AND CARE

 

Recharge only with the charger specified by the 
manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 
another battery pack.

 

Use power tools only with specifically designated 
battery packs.

 Use of any other battery packs may 

create a risk of injury and fire.

 

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, 
nails, screws or other small metal objects, that can 
make a connection from one terminal to another. 

Shorting the battery terminals together may cause 
burns or a fire.

 

Under abusive conditions, liquid may be ejected 
from the battery; avoid contact. If contact 
accidentally occurs, flush with water. If liquid 
contacts eyes, additionally seek medical help.

 

Liquid ejected from the battery may cause irritation 
or burns.

 

Do not use a battery pack or tool that is damaged 
or modified.

 Damaged or modified batteries may 

exhibit unpredictable behavior resulting in fire, 
explosion or risk of injury.

 

Do not expose a battery pack or tool to fire 
or excessive temperature.

 Exposure to fire or 

temperature above 100 °C may cause explosion.

 

Follow all charging instructions and do not charge 
the battery pack or tool outside the temperature 
range specified in the instructions.

 Charging 

improperly or at temperatures outside the specified 
range may damage the battery and increase the risk 
of fire.

SERVICE

 

Have your power tool serviced by a qualified repair 
person using only identical replacement parts.

 

This will ensure that the safety of the power tool is 
maintained.

 

Never service damaged battery packs.

 Service 

of battery packs should only be performed by the 
manufacturer or authorized service providers.

 

WARNING: 

Read all safety warnings, 

instructions, illustrations and specifications 

provided with this power tool.

 Failure to follow all 

instructions listed below may result in electric shock, 

fire and/or serious injury.

Save all warnings and instructions for future 

reference.
TRAINING

 

Read the instructions carefully. Be familiar with the 
controls and the proper use of the machine.

 

Never allow people unfamiliar or children with these 
instructions to use the appliance. Local regulations can 
restrict the age of the operator.

 

Keep in mind that the operator or user is responsible for 
accidents or hazards occurring to other people or their 
property.

PREPARATION

 

Never operate the machine while people, especially 
children, or pets are nearby.

 

Wear eye protection and stout shoes at all times while 
operating the machine.

Содержание STA1500

















Отзывы: