56 VOLT LITHIUM-ION CORDLESS BLOWER — LB7650E
9
ASSEMBLING/REMOVING THE BLOWER TAPERED/
SPREAD NOZZLE
◾
To Assemble(Fig. E & F)
Align the groove in the tapered nozzle with the tube
knob and push the nozzle onto the tube until it snaps
into place.
◾
To Remove(Fig. G)
Press and hold the nozzle-release button to disengage the
latch, then pull the nozzle straight from the blower tube.
Follow the same sequence to assemble or remove the
spread nozzle.
ASSEMBLING THE SHOULDER STRAP (FIG. H)
Depress the strap hook to open it, remove the loop
and attach it onto shoulder-strap mount hanger on the
blower.
OPERATION
WARNING:
Before each use, inspect the entire
product for damaged, missing, or loose parts,
such as screws, nuts, bolts, caps, etc. Tighten
securely all fasteners and caps and do not operate
this product until all missing or damaged parts are
replaced.
INSTALLING/REMOVING THE BATTERY PACK
Charge before first use.
◾
To Install (Fig. I)
Align the battery ribs with the mounting slots and press
the battery pack down until you hear a “click”.
◾
To Remove (Fig. J)
Depress the battery-release button and pull the battery
pack out.
WARNING:
Always take care to note the location
of your feet, children, or pets when pressing the
battery-release button. Serious injury could result
if the battery pack falls. NEVER remove the battery
pack when in a high location.
STARTING/STOPPING THE BLOWER (FIG. K)
Air-speed trigger only
1. Depress the air-speed trigger to turn on the blower.
2. The air speed of the blower is controlled with the
variable speed trigger. More pressure on the trigger
results in higher blowing speeds; less pressure on
the trigger results in lower blowing speeds. Adjust
the speed to suit the task at hand.
3. Release the air-speed trigger to turn off the blower.
Speed/Lock-on dial only
The blower can be locked at any speed with the speed
lock-on dial.
1. Turn the speed/lock-on dial clockwise to start the
blower. The air speed will increase as the dial is
rotated clockwise.
2. To decrease the air speed, turn the speed/lock-on
dial counterclockwise.
3. Keep turning the speed/lock-on dial counterclockwise
to the off position to stop the blower.
NOTICE:
If the speed/lock-on dial is not turned back to
the off position before the battery is removed, the blower
will not start when a fully charged battery is installed. This
is a protection feature to help prevent accidental startup.
Depress the air-speed trigger to deactivate the protection
and start the blower.
Boost mode
Press the boost button while working to temporarily
increase the air speed to the maximum level. The
blower will resume the previous speed when the boost
button is released.
TIPS FOR USING THE BLOWER
◾
To keep from scattering debris, blow around the outer
edges of a debris pile. Never blow directly into the
center of a pile.
◾
To reduce sound levels, limit the number of pieces of
power equipment used at any one time.
◾
Use rakes and brooms to loosen debris before blowing.
In dusty conditions, slightly dampen surfaces if water
is available.
◾
Conserve water by using power blowers instead
of hoses for many lawn and garden applications,
including areas such as gutters, screens, patios, grills,
porches, and gardens.
◾
The edge of the tapered nozzle helps with removing
wet leaves and clean out gaps in the sidewalk.
◾
Watch out for children, pets, open windows, or freshly
washed cars, and blow debris safely away.
◾
After using blowers or other equipment, clean up!
Dispose of debris properly.