Egnater Tweaker, Руководство пользователя

Страница: 7 / 12

1) COOL BLUE PILOT LIGHT
2) AC POWER SWITCH: Turns the
TWEAKER ON or OFF.
3) STANDBY SWITCH: With the switch
in the STANDBY position, the tubes
remain warmed up. When the STANDBY
switch is in the PLAY position, the
TWEAKER is on and ready to play. DO
NOT turn on the amp or have the STAND-
BY set to play without first connecting to
a speaker. The correct power up sequence
is to switch the POWER switch on while
the STANDBY switch is in the standby
position. Wait one minute for the circuits
to stabilize and the switch the STANDBY
to the PLAY position.
4) VINTAGE/MODERN SWITCH: This
switch modifies the power amp circuit
from a fairly “neutral” sort of response in
the VINTAGE setting to a more aggressive
tone and feel in the MODERN position
by boosting the low and high end just the
right amount.
5) MASTER: Overall volume after the
preamp section.
6) USA/AC/BRIT SWITCH: This is a
cool feature. Partly where the TWEAKER
got it’s name. This magical switch lets you
instantly select any one of the three classic
tone control circuits that are so familiar to
all of us. The USA setting duplicates the
classic American/California response so
revered in those “Blackface” amps. The
BRIT setting congers up the stronger lower
midrange girth of the British amps. The
AC setting creates the unique voice that
lives in the world of alternate British amps
whose three letter name starts with V and
ends with X. Use this switch along with
the tone control knobs to create a never
ending pallette of classic and unique tones.
7,8 & 9) TONE CONTROLS: Pretty
much self explanatory. The TWEAKER
tone control circuits will respond like
most amps you are already familiar with.
The unique thing here is that the
USA/AC/BRIT switch changes the tone
controls to be just about any tone you
could ever want.
10) CLEAN/HOT: Selects low gain lower
(CLEAN) for really clean to moderate
crunch. Hot unleashes the fury for super
high gain rock, metal or singing solos.
11) GAIN: Adjusts the amount of gain
(distortion) in the preamp. Set the GAIN
knob low and the MASTER high for the
cleanest sounds. Run the GAIN higher and
the MASTER lower for more overdrive.
12) BRIGHT/NORMAL: The BRIGHT
setting of this switch boosts the high end
for more sparkle on clean sounds and more
bite with distortion. A couple of things
to note here. This switch works directly
with the GAIN knob setting. The lower
the GAIN knob is set, the more affect the
BRIGHT switch has. Also, the BRIGHT
switch will have little to no effect with the
gAiN knob higher than about 3:00. This
is normal and is, in fact, the way bright
switches work on most guitar amps.
13) DEEP/TIGHT: This is another cool
“TWEAKER”’ feature. The TIGHT setting
works by cutting the deep bass at the input
stages of the preamp. This helps prevent
your overdrive sound from getting too
“muddy”. The DEEP position creates a
full, rich bass that sounds great for clean
sounds and also help “fatten” up single
coil pickups.
14) INPUT JACK: Plug your guitar in
here using a high quality, shielded instru-
ment cable.
QUICK START GUIDE
7
8 9 10 11
12 13 14