Product Specifications
7
Bridging Functions
- This switch provides fully transparent bridging functions.
It automatically learns node addresses, that are subsequently used to filter and
forward all traffic based on the destination address. When traffic passes between
devices attached to the same shared collision domain, those packets are filtered
from the switch. But when traffic must be passed between unique segments (i.e.,
different ports on the switch), the high-speed switching fabric forwards the packets
at near zero latency.
Switching Functions
- Store-and-forward switching is used to forward traffic to
other ports. This scheme ensures data integrity and provides a clean data stream.
Flexible Configuration
- This switch is not only designed to segment your network,
but also to provide a wide range of options in setting up network connections. It can
be used as a simple stand-alone switch; or connected with standard repeater hubs,
switches, or other network interconnection devices in various configurations.
Media Expansion Options
- You can use a fiber module to support applications
such as high-speed file servers, or for connecting to a collapsed fiber backbone
switch.
Product Specifications
Base Unit
Physical Characteristics
Access MethodCSMA/CD
Standards Conformance
IEEE 802.3, IEEE 802.3u,IEEE 802.3ab
Communication Rate
10/100/1000 Mbps
Communication Mode
Full or half duplex
Media Supported
10BASE-T - 100-Ohm Category 3,4,5 twisted-pair
100BASE-TX - 100-Ohm Category 5 twisted-pair
1000BASE-T - 100-Ohm Category 5 twisted-pair
Number of Ports
8 RJ-45 10BASE-T/100BASE-TX ports and one RJ-45
1000BASE-T port
Indicator Panel System:
Power; Ports: Link/Act, FDX/COL
Dimensions
25.0 x 11.7x 3.7 cm (9.84 x 61.0 x 1.46 in)
Weight
1.87 lbs (0.85 kg)
Input PowerFull range:
100 to 240V (±10%), 50 to 60 Hz (±3Hz)
Maximum Current
0.40A
RMS
max.@110V, 0.20A
RMS
max.@240V
Power Consumption
15 Watts max. @ 100-240 VAC
Heat Dissipation
51 BTU/hr max. @ 100-240 VAC
Temperature
0 degree C to 40 degree C (Standard Operating)
Humidity
5% to 95% (non-condensing)
Certification
CE Mark
Emissions
FCC Class A, CISPR Class A
Immunity
IEC 61000-4-2/3/4/6/11
