Egger EDG 1, Руководство по эксплуатации

Страница: 24 / 28

61760V04-2012-09 Seite / Page 24 von / of 28
Maintaining the unit
Remove condensation water which might escape at the cover with cloth. The housing can be
cleaned using a tiny moist cloth (maybe with a little bit of washing up liquid – no solvent). The hous-
ing must be completely dry before the commissioning.
Maintaining the cover seal
Keep the seal clean and grease it from time to time with Vaseline. If this seal is defect, please con-
tact our technical service.
Maintaining the cup
Empty the cup completely. To remove residuals incline the unit slightly forwards. Allow the unit to
cool down completely. Remove the agitator and clean the inner side after removing solidified re-
siduals using a moist cloth (if necessary, use a little bit of washing up liquid). Never fill the unit with
water because this could cause calcifications at the axial seal (danger of leakage).
6 Warranty
The manufacturer will grant a warranty for the device of 1 year from the purchase date. Exempt
from warranty coverage are damages caused by improper handling of the device, modifications
to the device and self-repair attempts. Seals are products subject to wear and tear and are not
covered by this warranty. Damages that are caused by a late or no exchange of the seals are not
covered by this warranty.
7 Troubleshooting
This list should help you to analyze and eliminate problems that might occur. We presume that the
unit is connected to a functional socket. In the case of unclear errors please send the unit to after-
sale service.
The protection switch FI of your power distribution actuates
Moisture entered the unit, fault current occurs.
Solution: Let the after-sale service check the unit.
The unit was started anytime and C or F are displayed
A power outage occurred and the unit returned for safety reasons to the standby mode. This also
applies when the clock timer function was started.
Solution: Re-start the unit by pressing button T1.