Copyright 2015-2016 Egasky Networks, Inc.
- 4 -
AP mode is connected to a monitoring center or broadband terminal end, namely the transmitting end,
Client mode is connected to the IP camera or other network devices, namely the receiving end.
Because the bridge is two-way transmission, in Point to Point program do not distinguish between the
transmitter and the receiver.
However, Point to multipoint program, still in strict accordance with the illustrated erecting equipment.
Since the CPE covers “AP mode” and “Client mode”, the following steps are categorized for convenience
reading to describe how to set each mode after successful log-in.
b. AP mode
b-1
、
Choose “Wireless Coverage”
，
Set SSID, Channel, Authentication , Key ;Click “Apply”
；
b-2
、
Change CPE ip address, Select Advanced Settings, Network> Lan Settings> IP Setting; Select "Static IP",
Set new ip Click "Apply"
；
