V E R S A B O A R D M O U N T I N G K I T I N S T R U C T I O N S
A
Remove adhesive backer, and apply friction pad to edge
bracket (adhesive-side to bottom of edge bracket).
B
Slide assembled brackets onto back of top corner mounts.
C
With edge brackets in place, position VersaBoard
on a 90° edge (file cabinets, tables).
Edge Brackets
Friction Pads
Corner Mounts
(rear view, left & right)
A
C
B
Each VersaBoard Edge Kit includes:
2 Left Corner Mounts, 2 Right Corner Mounts
2 Rubber Standoffs, 2 Edge Brackets, 2 Friction Pads
Rubber Standoffs
Corner
Mount
Edge Bracket
Top Corner Mount
(front view)
Friction
Pad
VersaBoard Edge Kit
• Place the VersaBoard on a flat surface, or upright on the floor, in the orientation in which it will hang.
• Attach Rubber Standoffs to a left and right corner mount to create two bottom corner bumpers (see details below).
• Slide bottom bumpers onto board first, then top corner mounts, as shown above; refer to the appropriate kit mounting instructions.
VersaBoard corner mounts are designed to slide on easily – change from a vertical board to a horizontal board in a SNAP!
Select a left and right corner mount and attach the rubber standoffs to convert them
to bottom bumpers (to protect walls and to prevent board from moving when in use).
Note:
Standoffs have a groove that fits into a slot on the back of each corner mount.
Proper attachment ensures a secure board.
HOW TO BUILD A CORNER BUMPER
A
Slide the wall mount brackets onto the top corner mounts of the VersaBoard.
B
Position board at desired location on wall, ensure it’s level, and
apply pressure firmly against top left and right corner mounts.
The positioning pins on the back of each wall mount bracket
will leave a dimpled impression on the wall. Remove the wall
mount brackets from the corner mounts.
C
Position each wall mount bracket so that the positioning pins
rest in the impressions marked on the wall in Step B. Use a
screw (#8 maximum) or suitable hardware to fasten each
bracket to the wall.
D
Slide the VersaBoard down onto the wall mount brackets.
Bottom Corner Mounts
(left & right)
(rear view)
A
A
B
B
C
D
Each VersaBoard Wall Kit includes:
2 Top Corner Mounts (left and right)
2 Bottom Corner Mounts (left and right)
2 Rubber Standoffs, 2 Wall Mount Brackets
What you’ll need to have on hand:
2 Screws (maximum size: #8) or suitable fastening hardware
Appropriate screwdriver and a level
Wall Mount Brackets
Positioning Pins
Wall Mount Bracket
(rear view)
Wall Mount
Bracket
(front view)
Wall Mount Bracket
(front view)
Top Corner Mount
VersaBoard Wall Kit
Corner Mount Assembly for Edge, Top & Wall Kits. Attach the corner mounts and bumpers, as shown above, before mounting.
WARNING:
This option is intended for use in areas that experience a minimum (to zero) walk-by traffic. If you anticipate traffic or movement,
it is recommended that you use an adhesive such as double-sided tape or Velcro
®
to secure the Edge Mount Assembly to the resting surface.
Rubber Standoffs
Rubber Standoff
Adhesive side
Note:
Prior to this step, corner mounts and bumpers
should already be installed on the VersaBoard.
Note:
Prior to this step, corner mounts and bumpers should already be installed on the VersaBoard.
Warning:
Wall Mount is considered permanent, ensure that you have positioned the board accurately prior to installation.
Installer to provide fastening hardware best suited to wall type and board weight.
Side
View
ATTACHING THE OPTIONAL PEN TRAY
A
Turn the VersaBoard and the pen
tray upside down.
B
Squeeze the ends of the cloth tray
1
and marker tray
2
toward each
other to widen the clasp area
3
.
C
Ease the pen tray onto the bottom
frame of the board until it snaps
into place. Turn the board upright
and place on mounting brackets.
Pen Tray sold separately.
Pen Tray
(upside down)
VersaBoard
(upside down)
Cloth
Tray
Pen Tray
Marker
Tray
C
Don’t forget,
you can also use the pen tray as a carry-handle
1
2
3
Top
Bottom
Top Left
Corner
Mount
Top Right
Corner
Mount
