I N S TA L L AT I O N
NOTE:
Handle the Tear Bar edges with care.
PICTURE A
1. Unscrew the clamp down knobs and raise the cover
to an upright position.
PICTURE B
2. Attach the tearbar to the board using the two machine
screws provided. Insert the screws through the predrilled
holes in the tearbar, and into the existing threaded
fittings in the board. Tighten until snug.
PICTURE C
3. Hang the flipchart on the adjustable Hanger Pins.
The pins slide to adjust for hole centres as necessary.
4. Close the cover and secure it by tightening the clamp
down knobs.
A
B
CLAMP
DOWN
KNOB
CLAMP
DOWN
KNOB
TEAR BAR
MACHINE
SCREW
HANGER PIN
FLIPCHART
PAD
C
