15
• Before using the machine check all parts for damages.
• Replace damaged parts immediately.
• When working on brittle material make sure that you are protected against harmful splinters.
SAFETY INSTRUCTIONS FOR PREVENTION OF ACCESSORY HAZARDS
Only use machine tools, accessories and consumables, which are recommended by the
manufacturer. Make sure choosing the correct size and the correct type. Only use accessories, which
are in proper condition and do not touch them during operation.
WARNING
– Injury due to carelessness!
ATTENTION
– If the machine is fixed to suspension equipment make sure that it is
secure. Never hang the machine onto the supply line.
• Separate the machine form any external energy source before changing the machine tool or an
accessory.
• Avoid direct contact with the machine tool during and after use as it can be hot or sharp.
Wear protective gloves!
Defective/ inappropriate gloves can lead to injury. Only wear proper hand protection, adapted to
the work place requirements.
WARNING
– Explosion hazard!
When operating the pneumatic drill in areas exposed to explosion hazards, only use accessories,
respectively devices, which are ATEX approved and specified. Use low-sparking accessories.
SAFETY INSTRUCTIONS FOR PREVENTION OF TRANSPORT HAZARDS
CAUTION
– Improper Transport, danger of life due to parts falling down! Damage of
the machine!
• Never carry the machine at the supply line.
ATTENTION
– Separate the machine from any external energy source before
transportation.
Check that the machine is undamaged and in proper condition. Wear worker’s protective
shoes!
