Ega Master 79658, Руководство по эксплуатации

Страница: 59 / 150

59
Fig. 11
Mounting the parallel stop
• If required, attach the parallel stop item 15. When not in use, fix it in the holder under the
clamp item 16.
Fig. 12
Free-hand cutting
Before use, check the saw and the saw blade for damage.
• Loosen wing nut item 18 and pull the saw out of the guide item 10 (see fig. 13).
• During cutting, always hold the saw with both hands (see fig. 14) (Two-hand-operation).
• Put the spacer item 20 along the material.
• Start the saw. Slowly feed the saw blade item 19 along material.
• After making the first cut, increase the pressure. Apply uniform feed through the material.
• After cutting, release the valve trigger.
• After working, re-attach the saw to the clamp.