•
To engage Walk assist mode, turn on the electrical system to the electric bike by
depressing and hold the “Mode” button on the handlebar controller for 2 seconds. And then
Depress and Hold the “Down” button on the handlebar controller continuously to have the
bike assist you on the road.
•
Walk assist will stop as soon as you release the button
5. Engaging the Front and Rear LED Lamps -
•
After turning on the bike’s system, depress and hold the “UP” button for 2 seconds to
engage front and rear LED as well as the LCD back light.
•
To turn the Lamps off, depress and hold the “UP” button again for 2 seconds, or by simply
turning off the bike’s electrical system via the “MODE” button or the battery “On/Off” switch,
the lights will turn itself off as well.
About the Brake Safety Feature on all our Electric Bikes.
•
ALL our electric bikes make use of a wired brake lever kill switch for safety purposes. When
the brake lever is engaged, it sends a kill signal to the controller to disable the motor under
all circumstances and condition. This will ensure the motor does not continue to spin when
you need the bicycle to stop.
How to read the Battery Meters and about the Li-on battery
There are 2 Battery meters on your bike. 1 is located conveniently on the Handlebar LCD. The other
Battery meter is located on the battery showing the current capacity of the battery in various states of
discharge. To check the battery capacity on the LCD simply install the battery and turn on the
electrical system. To check the battery capacity on the battery, turn on the battery and then depress
the battery meter button.
As with any Lithium-ion batteries, there are a limited number of times a battery can be charged. While
priming Lithium-ion batteries are not necessary (which means it may be charged whenever you want
without affecting its charge capacity), the number of times it is charged does affect the overall
longevity of the battery life.
To conserve battery power, switch off the electrical system by pressing the “ON/OFF” button on the
battery, when the electric power is not needed.
To reset the Trip-o-meter on your LCD hold the “Mode”+”Up” button simultaneously for 2 seconds.
! NOTE: You can remove the keys from the bike after locking the battery onto the rack. You do not
need to leave the key inserted on the bike to operate the electrical system of this bicycle.
! WARNING: Please keep your keys to your electric bicycle in a safe place. Each set of keys are
unique to your particular electric bicycle and unfortunately we do not keep a copy of your keys on file.
Nor would we have a way of reproducing them.
CARE INSTRUCTIONS
Battery
5
