EFX MK-VI Audio Controller Owner’s Manual
15
The switch functions in the Preset Order window are shown below.
SW#1 & SW#2
ˀG
Move the highlighted area left/right to select audio loop.
When the highlighted area is located in IN, the information about the currently selected preset is
displayed at the bottom of the LCD. you can move to another preset you want to edit using #5
and #9 switches.
SW#3 & SW#4
ˀG
Move the selected audio loop left/right.
SW#5 & SW#9
ˀG
Move the selected audio loop up/down.
SW#6
ˀG
Set the selected loop to the carry-over or disable it if it is already set.
SW#10
ˀG
Split the signal, or remove if it is already split.
Ex1) Move the input buffer before loop 3
Select the IInput Buffer as the highlight area and use switch #4 to move the right.
This is useful when using the fuzz pedals in loop 1 and 2.
Ex2) Move loop 8 to the next position on loop 9
Select the L
Loop 8 as the highlight area and use switch #4 to move the right.
