EFM Synthesizers EFM Mad Mouse Pro, Руководство по сборке и настройке, Страница: 18 / 27

Nothing should smoke or be hot to the touch. There should be no sound coming from the monitor amp.
Check for +5 and +/-12VDC.
Press a key on your keyboard. You should hear VCO1 and 2 mixed through the VCF and VCA.
Tune VCO2 to VCO1 by adjusting T5 to match the initial frequency of VCO2 to VCO1.
Fine tune T3 and T6 VCO1 and 2 scale trimmers so that the vcos track together. Get as close as you can. You will have to play with
the trimmers for the VCOs to get them correct.
Adjust T2 so that when the pitch bend lever is applied the pitch of VCO1 and 2 change by one note up and one note down. Play C2
and push the lever all the way up. Adjust T2 so that a D2 comes out. Push the lever all the way down and pressing C2 should play a
B1.
Your Mad Mouse Pro is complete. You will want to fine tune things in a few days to tighten everything up but it should be ready to
go.
Test all of the controls to make sure all the functions work. Enjoy your Mad Mouse-Pro
LM13600 TLO71
PIC16F84 AD7528