1. Clean approximately 20 cm of the cable end with a cleanser, i.e. spirit or equivalent and let
dry.
2. It is recommended to remove sharp edge of the cable insulation especially when the cable
diameter is in the upper half of the cable diameter range.
3. Open the front of silicon grease tube and dip the cable end in the silicone grease. Push the
cable through the housing before the stripping of wires.
4. Clean the cable end again with cleanser, i.e. spirit or equivalent.
Contents
A.
Silicone grease tube
B.
Body with connecting parts
C.
Plug or receptacle housing
The kit also includes: installation manual and paper towel
KD501-series
KD502-series
A
B
B
C
C
A