manualshive.com logo in svg

Efkon EFAS, Руководство пользователя

Поделиться
Скачать
Efkon EFAS Скачать руководство пользователя страница 78

Messages

78

EFAS

8.3

Printout Messages 

Display

Meaning

There is no paper in the printer. Insert a new reel of paper. For more information, see the section 
"Inserting a Reel of Paper" on page 45. When a new reel of paper has been inserted, printing

automatically resumes.
The temperature inside the printer is too high or rather too low.

Wait until the printer has cooled down or rather if printer has warmed up. Then start printing.

The printer is only active when ignition is on.

A running printout is halted if the ignition is switched off. Turn on the ignition again within 30 seconds 
to resume the printout automatically. Otherwise the printout is cancelled.
You removed the printer module from the digital tachograph.

This terminates printing. Remove the printer module only when the display shows 

Paper empty

.

The vehicle started moving while printing was underway (here: daily reports from card). 

Printing is terminated. Stop the vehicle and restart printing.

No data available for selected printout. This message may occur e.g. for printout type „D1/D2 status 
changes“ if no signal changes were recorded.

 

Содержание EFAS








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды