Efkon EFAS Скачать руководство пользователя страница 45

Страница: 45 / 135

Operation of EFAS – Driver and Co-Driver

EFAS

3.15

Inserting a Reel of Paper

This section describes how to insert a new reel of paper.

Danger

Only insert a new reel of paper when the vehicle is parked.



Negligence may cause accidents.

Danger

The print head is hot after printing. To avoid burning your fingers,
wait a short time before removing the printing module.

Note

Only use the thermal printer paper reels for digital tachographs,
approved by the manufacturer.

Note

Treat the printing module carefully. Avoid soiling.

Note

Use a brush to remove possible soiling.

Inserting a Reel of Paper

1. Park your vehicle. Turn off the ignition.
2. Use a coin to press against the printing module’s lock-

ing device. The locking device is located above the
right-hand card slot.

The printing module slides out of the digital tacho-
graph.

3. Pull the printing module completely out of the digital

tachograph EFAS.

Содержание EFAS








































































































































Результаты поиска

Содержание EFAS

Отзывы:

Бренды по названию

Популярные бренды

Efkon EFAS, Руководство пользователя

Результаты поиска

Содержание EFAS

Отзывы:

Бренды по названию

Популярные бренды