Z10-30
User’s Manual
Safety
advice
•
Make sure your battery has enough voltage for the controller to recognize the
battery type before first installation.
•
The battery cable should be as short as possible to minimize loss.
•
The charge controller is only suitable for regulating solar modules. Never
connect another charging source to the charge controller.
•
The controller generates heat during operation. Please be careful to install
the controller in a smooth, well-ventilated surface
.
Product features
•
Built-in industrial micro controller
•
Screen with backlight (Note: backlight will turn off if device is idle for 5
secs)
•
Dual USB output, up to 2.5A (support mobile phone charging).
•
Fully 3-stage PWM charge management.
•
Built-in short-circuit protection, open-circuit protection, reverse protection,
over-load protection.
•
Reverse current protection, low heat production.
1
