Duramax 6.6L LBZ/LMM
DSP5 User Guide
- 17 -
www.efilive.com
V8 Scan and Tune Scan
Pass-Thru Data Logging
To log data using FlashScan or AutoCal and V8 Scan and Tune software;
1. Open the EFILive V8 Scan and Tune.
2. Connect your FlashScan/AutoCal device to your PC and vehicle.
3. Turn the vehicle ignition to the
On
position.
4. Select an existing Dashboard configuration either by using the [Open Dash]
button or using the Dashboard drop down, or configure after making controller
and PID selections.
5. Navigate to the [F2: Scan] -> [F2: PIDs] menu option.
6. In the Engine field use the drop down list to select the E35A or E35B controller
type or use Auto Detect.
7. Drag PIDs or PID folders from the Available PIDs window into the Selected
PIDs window.
8. Navigate to the [F3: Data], [F4: Charts], [F5: Gauges] or [F6: Maps] tab and
configure your dashboard to arrange data displays where a dashboard has not
already been selected.
9. Users should [Save Dash] to save their custom configurations to reduce future
configuration requirements.
10. Start the vehicle.
11. Select either Record or Monitor from the [F3: Data], [F4: Charts], [F5: Gauges]
or [F6: Maps] screens.
