Dodge Cummins User Guide
- 28 -
www.efilive.com
License and Flash a Controller
1. Configure FlashScan/AutoCal V3 for BBX features if not already setup.
2. Copy selected tune file(s) from your PC to
FlashScan/AutoCal V3
if not
already copied via Quick Setup during step 1.
3. Connect your FlashScan/AutoCal V3 device to your vehicle.
4. Turn the vehicle ignition to the
On
position, (not the
Accessory
position.
Vehicle must not be cranked/running when flashing).
5. Navigate to the Tune Tool
menu and select F1: Tuning ->
F3 Program Full
menu option.
6. Navigate to the folder your tune file is located in and select
✔
to commence
the flash.
7. If the controller has not been licensed by this device previously, you will be
presented with an
“
Unlicensed Controller
”
message. Select
✔
to proceed with
licensing the controller, or
X
to exit without licensing the controller.
8. Select
✔
to confirm licensing the controller and commence the flash, or
X
to exit
without licensing the controller.
9. When the flash process is complete, select
X
to close the flash completed
message.
10. The Reset Controller notification will be shown, and the controller reset process
will begin.
1. Turn the vehicle ignition Off.
2. Click on the Start button to begin the countdown timer.
3. DO NOT turn the vehicle ignition on until the countdown timer
expires. This time is critical to allow the ECM to perform internal,
initialization functions after a read or flash operation.
Switch Tunes using FlashScan/AutoCal V3
1. Connect your FlashScan/AutoCal V3 device to your vehicle.
2. Turn the vehicle ignition to the
On
position.
3. Navigate to the
Tune Tool
menu and select
F3 Switch Tunes -> F1 Switch
CSP5
menu option.
Содержание Dodge Cummins
Страница 1: ...Cindy Myers Dodge Cummins User Guide...