Mimaki JV150 JV300
4
Printer
supplement
Print mode
There are six ways to print White:
Name
Meaning
Spot color WHITE_INK
The spot color of this name or alias from a separated document prints White. This is the
default mode.
Inked image
Every pixel which does not have CMYK = 0,0,0,0 on the printer side adds White
Bounding box
Every pixel in the image rectangle adds White. This is the recommended mode during
linearization and profile creation
White_INVERSE
Same as “Spot color WHITE_INK” but channel inversed
Ink chroma map
Reduces the amount of White for darker colors.
Off
White off, even when it comes from the separated document
Printing order
Since White is opaque, the printing order is important:
•
“Color on White” uses White as the foundation color, then prints other colors on top. This setting is for printing
on dark or metallic materials.
•
“White on Color” prints White on top of color. This setting is for printing transparencies from the back.
White ink coverage
White ink coverage is an option that configures the amount of white ink relative to black. The available settings are
50%, 63%, 80%, 100%, 125%, 160%, 200%.
Option support
Media length correction
In Fiery XF you enter the target length and the actual_length. The MEDIA COMP value is then
( target_length / actual_length -1 ) * 10000
This formula gives an exact MEDIA COMP value, although the corrected media length may be slightly inaccurate.
For example, if you enter a target length of 100.60 cm and an actual length of 100.00 cm, the MEDIA COMP value
will be +60.
Known issues
Due to a firmware bug, the “Print End Dry Time” setting may not work correctly for printer firmware versions earlier
than 1.40
Note that the Fiery XF driver may not work correctly for Mimaki USB driver versions earlier than 4.1.2.
