How-To: Using the IQ-501 with the Fiery server
8
Fiery Calibration from Fiery Color Profiler Suite (FCPS)
4. Select the
Fiery
server that you wish to calibrate.
Click the “
+” symbol to discover the Fiery server
if it is not listed.
5. Select
Recalibrate
and click
Next.
In this exercise we are recalibrating an existing
calibration set.
1. Start
Fiery Color Profiler Suite.
If you have not purchased and installed a license
for FCPS you will need to run FCPS in Demo
mode for Fiery Calibration as follows.
2. Select
Run in Demo mode.
This step will not be necessary if the license is
installed and activated correctly.
3. Click on the
Calibrator
icon.
Note that Calibrator and Inspect are the only
two modules that allow full capabilities without
a license. Inspect is not discussed in this
document.
