11
Installation and Service Guide: Color Controller E-85A
Introduction
•
Keep magnets and magnetic-sensitive objects away from the hard disk drive.
•
Do not loosen or remove the screws on the top of the hard disk drive. Doing so voids the warranty.
•
Handle the hard disk drive by its sides and avoid touching the printed circuit board.
•
Do not drop, jar, or bump the hard disk drive.
•
Before you remove or install a hard disk drive, allow it to reach room temperature.
Avoid magnets
Keep magnets and magnetic-sensitive objects away from electronic components, especially the hard disk drive.
Avoid fan blades
Attention :
ce produit contient des pièces mobiles dangereuses. Veuillez le maintenir à l'écart des pales de ventilateur lors
de sa maintenance.
Attenzione:
questo prodotto include parti mobili pericolose. Mantenere la distanza dalle pale della ventola quando sono in
uso.
Warnung:
Dieses Produkt verfügt über gefährliche Teile, die sich bewegen. Halten Sie bei der Instandhaltung Abstand zu
den sich bewegenden Ventilatorblättern.
Advertencia:
Este producto contiene piezas móviles peligrosas. Cuando realice el mantenimiento de este producto,
manténgase alejado de aspas de ventilador en movimiento.
Waarschuwing:
dit product bevat gevaarlijke bewegende delen. Blijf uit de buurt van bewegende ventilatorbladen bij het
uitvoeren van onderhoudswerkzaamheden aan dit product.
Atenção:
Este produto contém partes móveis perigosas. Ao fazer a manutenção deste produto, manter afastado de
movimento das pás do ventilador.
Aviso:
este produto contém peças removíveis perigosas. Ao realizar a manutenção deste produto, mantenha-se longe das
lâminas removíveis do ventilador.
Use caution with sharp edges
The edges of some E-85A components are sharp.
Electrostatic discharge
When you work with electronic components, electrostatic discharge is a concern since it can destroy circuits, or damage
them, reducing their life span. The area around the printer is most likely not static-free, and electrostatic discharge could
occur.
Warning:
The E-85A contains hazardous moving parts. When servicing the E-85A, keep away from moving fan
blades.
