EFI E-45 Скачать руководство пользователя страница 59

Страница: 59 / 126

Installation and Service Guide: Color Controller E-45

Replacing parts

Motherboard replacement overview

Removing the motherboard

The motherboard attaches to the side of the chassis, below the power supply. Before you remove the motherboard, you
must remove the following:

•

The left panel

•

All boards installed on the motherboard

You suspect a faulty motherboard

or hard disk drive.

Replace the hard disk drive.

Reinstall system software.

Problem solved?

Yes.

Reassemble system and verify functionality.

No.

Reinstall old hard disk drive.

Replace the motherboard.

Connect the

motherboard replacement dongle.

Enter Service Mode and

verify the new motherboard

installation.

Reinstall the old motherboard.

Return the new motherboard and

dongle to inventory.

Are test pages

printed successfully?

Transfer options and

BIOS information to the

new motherboard.

Yes.

No.

See

See

See

See

See

See

Note:

Each page

reference includes more
information for each
task.

Содержание E-45































































































































Результаты поиска

Содержание E-45

Отзывы:

EFI E-45, Инструкция по установке и обслуживанию, Страница: 59 / 126

Результаты поиска

Содержание E-45

Отзывы: