Operation Guide
Before plugging in the table, make sure that
The Lifting Columns are level and set at their lowest position.
All the screws are tightened to avoid the desk becoming wobbly.
Calibrate the desk by following the steps below:
Please press the Down button and hold for 10-15 seconds until the table stutters and beeps.
Release the button. Your desk is ready to use!
Adjust the table to the desired height, then press M.
“S-“ will flash on the display.
Program Presets
Advanced Safety Feature: Lock and unlock the table
Press the Up and Down buttons at same time for 5
seconds, until “LOC” appears on the display.
All buttons will be inactivated and no change can be
made.
Press the Up and Down buttons together again to
unlock the Keypad and all of the table’s features.
Prepare for First-time Use
Memory Programmable Presets Desk Height Up and Down
Press M for 10 seconds, the Keypad will display “1-1”.
Press the Down button and it will change to “1-0”.
Press M for 10 seconds to lock the setting.
Raise the desk to the desired maximum height.
Press M and the Up button together for 5 seconds until
Lower the desk to the desired minimum height.
Set Maximum Height Limit
●
Set Minimum Height Limit
Changing from centimetres to inches
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Press a number to set the desired height as a preset.
you hear a beep. This sets the maximum height limit.
until you hear a beep. This sets the minimum height limit.
Press M and the Down button together for 5 seconds until
