High power shape projector
USER’S GUIDE EFFI
-SHARP-V2
Version 2.1.2020
Last update:
June 17, 2020
Mini Parc du Verger
–
Bâtiment E
1 Rue de Terre Neuve
91940 LES ULIS, FRANCE
Tel: +33 9 72 38 17 80
Fax: +33 9 72 11 21 69
Email: [email protected]
Page 2 / 4
Mask (Disc)
EFFM-SPANNER-WRENCH
Ring
Objective
Mask (Square)
Ring
EFFM-SPANNER-WRENCH
Clamp
EFFI-SHARP-CPT
-VVV
-XX
-YYY
-Z
-
…
LED version
Objective
Wavelength (nm)
Shapes projection
Option
MX1
MX2
NF
(Near Field)
MF
(Middle Field)
FF
(Far Field)
CM
(C-mount)
385
395
405
465
525
625
850
000
(White)
1
(Square 9*9mm²)
2
(Disc Ø 15,1mm)
3
(Half-moon R=9,5mm)
POL
(polarizer)
Regardless of maintenance, the product must be switch off. For more information, please refer to the datasheet available online.
CHANGE THE MASK
Reference
Maintenance
For the C-mount version, unscrew the C-
mount adaptor before following the “change the mask” part.
To handle the optical components, wearing gloves is strongly recommended.
To clean the optical components: Use compressed air duster if there is dust.
To remove marks on the lens or the window, just a drop or two wiped of alcohol-based lens cleaning fluid in a gentle circular motion
with a cleaning tissue. Always apply the fluid to a tissue rather than the lens itself.
Place the new mask
4
Unscrew the ring
2
Remove the mask carefully
3
Screw the ring
5
Screw the objective
6
Unscrew the objective
1
