Adjustable beam power ring
USER MANUAL EFFI-RING-HSI
Version 1.2.2022
Last update:
February 23, 2022
Mini Parc du Verger
–
Bâtiment E
1 Rue de Terre Neuve
91940 LES ULIS, FRANCE
Tel: +33 9 72 38 17 80
Fax: +33 9 72 11 21 69
Email: [email protected]
UK Importer: Gardasoft Vision Ltd.
Trinity Court, Buckingway Business Park
Swavesey, Cambrige CB24 4UQ UK
Page 2 / 4
EFFI-RING
-HSI
-YY
-ZZ
-
…
Wavelength (nm)
Windows
Lens position
Option
Hyperspectral Visible-NIR
TR
(Transparent)
SD
(Semi-diffusive)
OP
(Opaline)
P0
(no lens)
P1
(45°)
P2
(25°)
P3
(10°)
POL
(polarizer)
-POL-IP
(polarizer glued for IP version)
STR
(driving control)
Please note that with the polarizer accessory, the EFFI-Ring is IP50. For IP65 polarized version, choose -POL-IP option.
During any maintenance operation, the product must be switched off.
HOW TO CHANGE THE OPTICAL CONFIGURATION
Reference
Maintenance
To handle the optical components, wearing gloves is strongly recommended.
To clean the optical components: Use compressed air duster if there is dust.
To remove marks on the lens or the window, just a drop or two wiped of alcohol-based lens cleaning fluid in a gentle circular motion with a
cleaning tissue. Always apply the fluid to a tissue rather than the lens itself.
P0 P1 P2 P3
Numbers 1, 2 and 3 are inscribed
on the edge of the lens plate
and
correspond to the lens position.
Rotate
the lens to align the number of the desired position with the
outgrowth of the light.
1) Unscrew the M2 screws and separate all parts.
2) Align the lens plate to the desired position and place into the light.
3) Place the lens holder, then the desired diffuser.
4) Close the product.
