6
EN
depending on the type of fabric you are going to iron/steam.
The set temperature icon will flash until the soleplate reaches the desired
temperature.
3. After this, you can start steaming your clothes. Please note that the
higher the temperature setting, the greater the steam output is. The
maximum steam output is about 500 mg/min. Steam won’t be produced
if the temperature has not reached the set level.
4.
AUTOMATIC SHUTDOWN FUNCTION
If the appliance is not used for a specified period of time, it will turn
off automatically. Usually, it turns off after 8 minutes of inactivity in an
upright position or 30 seconds in a horizontal position. Move the iron
slightly or press any button and the iron will heat up again to the pre-
set temperature.
Linen/Max steam
Cotton/Moderate steam
Wool/Min steam
Nylon/Without steam
VERTICAL STEAM IRONING FOR STEAMING
CLOTHES AND FABRICS
1. If you are using a textile brush, put it on the tip of the iron before switch
-
ing it on.
2. After the iron is plugged into an electrical outlet, set the cotton setting.
3. Wait until the indicator stops flashing. Lift the appliance and hold it up
-
right slightly, tilting it upward.
4. Press the steam button and slightly move steam back-and-forth over
the area you are steaming.
5. If the steam output goes down, put the appliance into a horizontal po
-
sition for a few seconds. Then, move it back to an upright position and
continue the steaming.
