U S E R M A N U A L E P S - D
Technical specifications and data are subject to change without any prior notice.
10
Settings routine
The settings routine can only be used when the electronics are switched on from
the beginning, achieved by switching the battery off and removing the supply fuse
(or remove input supply). Then connect the mains/fuse and switch the battery on.
The electronics will start up and the door display will indicate FAMOSTAR.
During this period, approximately 5 seconds, pressing both door buttons
simultaneously can start the Setting Routine.
NOTE: DO NOT INTERRUPT THIS ROUTINE, RATHER
COMPLETE THE SETTING EVEN IF AN INCORRECT
SETTING SHOULD BE DISCOVERED. PERFORM IT AGAIN
ONCE THE UNIT HAS STARTED.
Pressing the right-hand button (according to symbol >) will change the selection to N
(no) and then pressing the left-hand button will take you directly to the following setting
The following settings exist and have to be set:
1)
<
OK French
> - This is the language that will be displayed. English can be
choosen.
2)
<
Set Clock? – Y/N
>: will be indicated. This setting provides the unit
clock with a new setting, including time and date
<
OK Year 00
>: use right-hand button to choose year (0-99 and
around). Then press left-hand button to accept the choice.
<
OK Month 01
>: select 0-12 using the right-hand button, accept using
the left-hand button.
<
OK Date 01
>: select date 01-31 depending on month, the display will
scroll the number of days existing in the selected month, also for leap
years.
<
OK Day Sun
>: select relevant weekday using right-hand button,
confirm using left-hand button.
<
OK Hour 00
>: select the hour of day.
3)
<
OK Batt A/H 011
>: Press right-hand button and select relevant
battery size, confirm using left-hand button.
4)
< Fire alarm 1/2/3
>:
Position 2 is standard. This lights up all the load
on mains if the fire-alarm is activated.
