EFFECTIM EFM01, Руководство пользователя, Страница: 7 / 14

12 11
Befor
e Use
Befor
e Use
 Estimated Charging Time
Charging time Operating time
Approximately
3.5 hours
Approximately
60 minutes
* The time indicated at left is the operating time
immediately after a full charge of the battery
when the device is used at an ambient
temperature of around 25º C.
* Operating time may vary depending on the
operating level and/or operating environment.
* The actual charging time will differ depending
upon the remaining battery and the charging
environment.
Pre-testing on Skin
* When using the device or the dedicated serum for the first time, always test for compatibility with your skin.
1
Clean your skin.
• Wash the inside of your wrist with soap and water and then wipe it dry with a towel.
2
Apply the dedicated serum to the inside of your wrist and use the device
for about three minutes.
• Do not wet or rub the pre-testing site.
If you experience any skin abnormality (redness or burning sensation) at the
pre-testing site within 24 hours, stop using the device.
Functions

Safety functions
• Temperature sensor
If the temperature of your skin or the treatment head becomes too high, the power will be turned off for
safety (the treatment head flashes and beeps five times). When this happens, let the device rest for about
30 minutes.
• Motion sensor
Detects movement of the device and pauses output for safety reasons when the treatment head has been
used on the same area continuously.
When movement of the device slows, the motion sensor may reduce the level of warmth.
 AUTOMATIC PAUSE/
AUTOMATIC OFF function
Approximately three minutes after the power is turned on, the device will beep and then pause (the
treatment head will flash). Press the Power/Level button to resume operation. The device will automatically
switch off approximately three minutes after it has been turned on.
The device will switch off approximately three minutes after it has been turned on even when it is paused.
 Effect indicator
The indicator flashes to notify you that sufficient thermal energy has reached your skin. There are three
levels of flashing to indicate the degree to which thermal energy has reached your skin. When it reaches
the maximum, the device vibrates. It does not indicate when the device is not touching your skin or
outputting thermal energy.
 Battery level indicator
When the power is turned on or off, the battery charge indicator flashes three times to inform you of the
battery level.
Battery level
“Low”
Battery level
“Medium”
: Flashing
: Solid lighting
Battery level
“High”