Saving a time in a MEMORY cell
1. Determine the cell in which a new time value is to be stored, e.g.,
CEL1
,
CEL2
... (Refer to "Viewing
MEMORY
cells" on page 20).
2. Press
RUN/SETUP
to place the dispenser in
SETUP
mode (
SETUP
indicator light on).
Note:
Once cell value s are cleared, they canot be recalled.
3. Press
STEADY/TEACH
to clear cell contents.
4. Enter the desired time setting by using the
TIME SET
button or the
TEACH
function and foot pedal (refer to page 12).
5. Press
RUN/SETUP
to place the dispenser in
RUN
mode (
RUN
indicator light on) and save the setting in cell memory.
The dispenser is now ready to use the preset value you just stored.
To recall and use a time in MEMORY
In the
RUN
mode, press
CELL SELECT (up) (down)
to step through the
cells until you locate the desired cell. The dispenser is now ready to
use the time stored in the selected cell.