#
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
9
SC TO 2000 M - 091210
Assembly page 9/20
Fax +32 2 359 95 50
OPERATING INSTRUCTIONS FOR TOASTING WITHOUT MOTIF PLATES
•
Before using your appliance for the first time, check if it is clean (see “Maintenance and
cleaning”) as it comes into direct contact with bread. Check if any object has fallen into
the slot.
•
In the first time, connect the appliance only to a mains earthed wall socket. A grommet
on the bottom of the appliance enables to maintain the cord by positioning it to the
backside of the appliance.
•
CAUTION: It is normal if some smoke or smell emanates from the appliance when using it
for the first time. Therefore, we advise you to use your appliance empty once before the
first use.
•
Place the bread slices in the slot (for French bread, cut a loaf shorter than the slot, then
cut it in two pieces along its length). Your appliance is provided to receive French bread,
but also pieces of toast or other bread slices if their thickness and their length are shorter
than the one of the slot.
•
Press down the bread carriage handle until it stops. Then release the pressure and the
handle will stay in the lower position, which means that the heating process has begun. If
the handle comes up immediately, check if the appliance is plugged in as it blocks only
when the unit is plugged in.
•
You can adjust the browning intensity to obtain a more or less toasted bread by
positioning the browning control selector to one of the degrees marked from 1 to 6.
Therefore you only have to turn clockwise to increase the intensity, and anticlockwise to
decrease it. The higher the number is, the more toasted the bread will be.
•
During the functioning, if you think that the bread is toasted enough or for another reason,
you can break the heating process simply by pressing the cancel button.
•
The reheat button allows you to reheat already toasted bread or to toast bread which is
not toasted enough during a short time without modifying the browning degree.
•
The defrost button allows you to toast bread that has been frozen beforehand.
•
At the end of the cycle, the bread carriage handle unlocks and you can take the toast
out. Your toaster has an extra lift function, i.e. you can lift the bread carriage handle even
a little more when it has unlocked in order to facilitate the withdrawal of the toast that is
ready.
•
Always unplug the appliance after use and let it cool down before handling or storing it.
•
When storing your appliance, wind the cord around the cord storage facility underneath
the appliance and attach the end of the cord in the notch.
OPERATING INSTRUCTIONS FOR TOASTING WITH MOTIF PLATES
Unplug the appliance.
Insert the motif plates in the guide rails. Please always use all 4 plates, not just 2, otherwise your
toast might burn.
Connect the appliance to a wall socket.
Put the browning control selector on position 6. Press down the bread carriage handle and
press the „DEFROST“ button as well. Your toast is now being browned and the motifs are being
imprinted. The automatic cutout ends the toasting; your toast is browned and done.
!!!CAUTION!!! The motif plates will become very hot during use. Danger of burning!
If you want to take the plates out afterwards, unplug the appliance and use the provided
tongs.
Never change the motif plates when the toaster is in operation.
Let the plates cool down befor you change.
