E F A P O W E R E V - P C - I N S T A L L A T I O N A N D U S E R M A N U A L
2 | 37
1
GENERAL PRODUCT DESCRIPTION
EFAPOWER EV- Public Charger station is able to charge all electric vehicles
compliant with AC charging system standards.
The charging session stop automatically based on signals from EV, or it can be
manually stopped by the user.
EFAPOWER EV-PC consists of a Charging Station with a Central Unit and up to
two outputs.
This charger is intended to be mounted on the wall (as represented in Figure
1) or anchored to the floor with an external Pedestal accessory (as
represented in Chapter 3).
The architecture of this equipment is highly scalable: one single Central Unit
is able to control the operation of several Satellite units.
The following AC outputs are available:
✓
For
CE
marked units: 2,3kVA; 3,7kVA; 7,4kVA; 11kVA; 22kVA and 43 kVA
✓
For
ETL
marked units: up to 7,2kVA (Level 2)
✓
For
GB
marked units: 3,7kVA; 7,4 kVA; 11 kVA and 22kVA
EFAPOWER EV-Public Charger station is user friendly and safe. On units with a socket, there is a locking
mechanism inside the socket, which prevents the user from disconnecting the cable from the charger without
first stopping the charging process on the Central Unit. The charger has a color warning LED that shows the
operation status.
Each EFAPOWER EV-Public Charger station can be used as a stand-alone charger, or it can be integrated with a
Charging Infrastructure Network or Network Management System (NMS). The operation and status of the
individual station would then be controlled by the Central Management System.
EFAPOWER EV- PC station codification and configurations are presented in Chapter 3.
Figure 1 - EFAPOWER EV-Public Charger