Translation of original operating
manual
EFA Trimmer
OM NO.: 001 580 629
14 of 22
Version 13.11.2020
Secure the trimmer (3)
5. Release the locking lever 2
Cover plate 5 and locking lever fall into the base
position, Abb. 17
The trimmer has now been put out of service
and secured.
EFA Trimmer 90D / 130D
The pneumatic trimmer has no suspension
device. Place the trimmer with the blade down
in a protected location.
6. Assembly
WARNING
Automatic startup!
Turn off and disconnect the device
from the power or compressed air
supply before starting any repairs!
6.1 Replacing the blade
ATTENTION
Use only original spare parts!
This is the only way to ensure that
the machine functions properly
Cutting hazard!
Wear cut-resistant safety gloves!
The trimmer contains a blade driven by a pinion.
6.1.1
Removing the blade
Loosening the screw
1. Loosen the screw (1), Abb. 18
Prying open the blade holder
2. Insert the tool change pin (2) between the
screw and the housing (3), Abb. 19
3. Pry the blade holder (4) open with slight
pressure and hold it, Abb. 19
4. Hold the tool change pin (2) in position
2
5
1
4
2
3
