9
Cabinet Mounting
-
Drill 4 holes of Ø 6mm at the bottom of the cabinet according to the positions of the screw holes
on top of the cooker hood (H)
-
Put the one-way valve on the cooker hood screw holes and lift the cooker hood to the bottom of
the cabinet.
-
Tighten the hood with the 4 screws provided to the four holes at the bottom of the cabinet (I)
-
Assemble the cooker hood in reverse procedure as step 1 & 2
-
Make the electrical connection
Electrical Connection
Before completing any connection, make sure the house voltage corresponds to the voltage
indicated on the label affixed inside the appliance
It is advisable to call a qualified technician to make the electrical connection
.
Appliance fitted with plug
Connect it to a socket which conforms to current regulations. If you intend to connect it directly
to the electric mains, remove the plug and fit an approved bipolar switch with a minimum
contact opening of not less than 3mm.
If the plug is not accessible once it has been inserted in the socket, it will however be
necessary to fit an approved bipolar switch with a minimum contact opening of no less than
3mm.
Appliance without plug
Fit an approved plug or an bi-polar switch with a minimum contact opening of no less than 3mm.
T
he company is not liable for any problems caused by the user’s failure to comply with the above
instructions
H
I
