Eelectron Horizone Mini IN00M02WEB, Руководство по установке

Страница: 13 / 118

EELECTRON SPA IN00M02WEBFI00020100_ADMIN_MANUAL 13 / 118
Administration and Display
HORIZONE MINI is divided into two distinct environments for its configuration and use by the end
user:
•
ADMINISTRATION: working environment with which it is possible (according to the user
access rights) to configure all aspects of the WEBSERVER and building automation
supervision
•
VISUALISATION: graphic environment designed for daily use of supervision by the end user,
with which you can navigate through the pages included in the CONFIGURATION section,
send commands to building automation devices and view their status in real time
To switch between sections:
•
From ADMINISTRATION, switch to VISUALISATION by pressing the display button in the
upper right corner
•
From VISUALISATION, enter the configuration (if you have the necessary rights) via the
“CONFIGURATION” button in the toolbar at the bottom of the screen
Restoring the factory IP Address
If necessary, you can reset the factory IP address of HORIZONE MINI using the “RESET” button
available on the side of the WEBSERVER. To do this:
•
Open the HORIZONE MINI front panel using a small flat blade screwdriver and gently lever
I tin one of the side slots
•
Locate the “RESET” button on the back of the printed circuit board vertically
•
Press the button for at least 10 seconds, until the “SERVICE” LED on the front of the device
starts flashing, then release the button
•
Within the next 5 seconds, press the button for 1 second and release; within a couple of
seconds the front LED will light up steadily for a couple of seconds
•
When the LED turns off, the WEBSERVER can be reached at the factory IP address
(192.168.0.110)
If the LED turns off after pressing for a prolonged period (10 seconds) before pressing it for a short
period, repeat the entire procedure.